Supply - PAC supply of iron 15,001,264,521 - supply of PAFC 15,001,264,521 - PAFC 15001264521 supply - the PAFC 15,001,264,521 supply - PAFC 15001264521 Website: www.sponge-iron.com polymerization PAFC (PAFC) of the company's sales PAFC main features: solid product is brown, red-brown powder or grain-like, easily soluble in water. Can be used for domestic water, drinking water and industrial waste water, sewage treatment, coagulation effect the performance of the residual turbidity, the chroma reduce, has floc formation of the blocks fast, high adsorption performance, and good sludge filtration rebate performance characteristics, especially in the treatment of water with high turbidity, low temperature and turbidity water, the treatment effect is more obvious. Based on the principle of synergy, by adding a single quality iron ions or ferric iron compounds composite obtained a new type of high efficient coagulant hydrolysis of an inorganic polymer coagulant, coagulation by aluminum and iron salts . It sets the respective advantages of aluminum and iron salts, and the morphology of the aluminum ions and iron ions have improved significantly, and the degree of polymerization is greatly improved. Take aluminum, iron coagulant each flotation operation to the benefit of improving the performance of the PAC coagulation; purification of high turbidity water and low temperature and low turbidity treatment effect was particularly evident, may increase the alkaline additives or other coagulant aids. The performance and advantages of the ferric chloride (PAFC), mainly as follows: 1, hydrolysis speed, hydration weak. The formation of alum dense settlement rate. By the impact of changes in water temperature to meet the requirements of the shear force generated in the flow process. 2, solid tan, reddish-brown powder, easily soluble in water. 3, which can effectively remove the source of aluminum ion in the water, and aluminum salts after coagulation water residual free state aluminum ion. 4, for a wide range of drinking water, industrial water, domestic water, sewage, and industrial wastewater treatment. 5, less medication, the treatment effect, 10% to 20% cost savings than other coagulants. 6, use and packing, as well as considerations basic polyaluminum chloride. The use of ferric chloride (PAFC): 1, according to the raw water before use small test first to determine the optimal amount invested. 2, used in the production: solid: water = 1/5, the first mixed and dissolved, and then water was further diluted to a content of 2 to 3% of the solution can be. Ferric chloride (PAFC) storage and Specifications: This product shall exist drying, moisture, avoid heat, storage and transportation to prevent contaminated by toxic substances and damp heat, do not damage the packaging. This product uses a non-toxic vinyl bag, plus a woven bag, net weight: 25kg.